You can build a perfect weldment and still lose the customer if the finish fails. Peeling, rust creeping under the coating, fish eyes, a color that doesn't match the last batch: your customer sees all of it as your problem, not your coater's. That's why picking a finishing partner matters as much as picking a steel supplier. This post explains how powder coating for fabricators works at ADK Blast N Coat, and how to make handing off your parts quick and predictable.
Built for Fabricators and Welding Shops
ADK Blast N Coat LLC is an owner-operated sandblasting and powder coating shop at 22 Park Road in Queensbury, NY. Fabricators and welding shops are a big part of what we do. Local shops in Glens Falls, Lake George, and Saratoga Springs drop parts off, and we also work with companies all over New York State and take in work from anywhere. Our finished parts end up on jobs across the United States.
Whether you're sending one custom gate or a recurring order of brackets, the goal is the same: parts come back coated right, on spec, and ready for your next step.
Prep for New Steel: Pretreatment Wash or Blasting
Most fabricated parts show up as new, never-coated steel or metal. For those parts, you choose the prep: our 5-stage pretreatment wash or sandblasting. It comes down to what you want for the job and your budget, and we're happy to talk through the options.
The 5-stage pretreatment wash:
- Clean off residual cutting oils, shop soils, and any rust
- Chemically etch the surface so the powder has a profile to grip
- Apply a conversion coating for added corrosion protection
- Rinse and seal to remove all the chemicals used
- Final inspection before any powder goes on
Oil from fabrication and handling is one of the main causes of fish eyes and adhesion failures. The wash removes it so the coating bonds to clean metal. Sandblasting cleans the steel down to bare metal and leaves a profile for the powder to grip.
Parts With an Existing Finish
If a part already has paint, an old coating, or real rust and corrosion, it gets sandblasted. That includes parts you've modified or repaired in your shop and reused material. We don't do welding or metal repair ourselves; we're the finishing step. If blasting uncovers an area that needs attention, like pitting, thin metal, or a crack, we'll let you know before we coat it. (More on blasting in our post on sandblasting vs. media blasting.)
Room for Long and Oversized Fabrications
Our curing oven measures 8 feet wide by 8 feet high by 20 feet long. That fits long railings, structural members, frames, and full racks of production parts. The real limit depends on the part's shape and how it hangs, so send dimensions or a drawing and we'll confirm the fit before you load the truck.
Masking, Colors, and Consistency
- Masking: Threads, mating surfaces, ground points, and holes that have to stay bare get masked to your spec. Mark them on the drawing or tell us when you drop off.
- Colors: We offer finishes in over 6,000 colors, in gloss, satin, flat, and textures. Give us a RAL number or your customer's color code.
- Repeat work: For recurring jobs, tell us the exact powder and spec once, and reference it on every order.
One-Offs, Production Runs, and Shipping
We coat everything from a single custom piece to small and large repeat production runs. For production customers we also offer assembly, packaging, and shipping, so finished parts can go straight to your customer or job site instead of back through your shop.
Tips That Make Handoff Faster
A few things on the fab side save time and help the finish:
- Grind spatter and sharp edges. Powder pulls thin on sharp edges, and spatter shows through the coating.
- Avoid anti-spatter sprays with silicone. Silicone is hard to remove and a common cause of fish eyes.
- Seal or vent closed sections. Trapped air or moisture in tubing can outgas in the oven and leave pinholes.
- Leave or note hang points. A hole or tab we can hang from keeps hook marks off the show faces.
- Group parts by color and spec on the pallet, with a simple packing list.
Frequently Asked Questions
Do new steel parts need to be sandblasted before powder coating?
Not necessarily. New, never-coated steel can go through our 5-stage pretreatment wash or get sandblasted, depending on what you want and your budget. Parts with an existing finish, coating, or real rust get sandblasted.
How big a fabrication can you coat?
Our oven is 8' wide by 8' high by 20' long. Send dimensions and we'll confirm how your part fits.
Do you only work with local fabricators?
No. We work with companies all over New York State and take in work from anywhere, and our finished parts end up across the United States.
Can you handle recurring production work?
Yes. We take everything from single parts to small and large repeat runs, and we can assemble, package, and ship finished parts.
Can you match my customer's color?
We offer finishes in over 6,000 colors. Send the color code or a sample.
Send Us Your Next Job
If you're a fabricator or welding shop looking for a dependable finishing partner, send us your drawings, quantities, and color spec.
- Call: (518) 350-9373
- Email: Info@adkblastncoat.com
- Visit: 22 Park Road, Unit B-2, Queensbury, NY 12804
- Request a quote: Contact us